Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
KF Flanges Introduction
They are manufactured according to the DIN 28403/ISO 2861 standard. These are sexless flanges, meaning that both sides of the connection are identical and there are no O-ring grooves cut into the flanges.
The standard sizes are KF10, KF16, KF25, KF40 and KF50. Less common are the KF20 and KF32 sizes.
This flange system is also known by several other names such as NW, QF, DIN, and ISO-KF, but all of these flanges are the same.
The principle of operation is this: a centering ring holding an O-ring is placed between the two flanges and then the flanges are aligned and brought close together. The wing nut clamp (chain clamps are also available) is placed around the two flange faces and the wing nut is tightened. The two flange faces are squeezed toward one another, thus compressing the O-ring.
These flanges are used in the pressure range from atmosphere to as low as 1×10-8Torr or mbar. The operating and bakeout temperature range depends upon the O-ring material. The most common O-ring material is FKM (Viton-A) which is suitable for the operating temperature range of 0 to 180 deg C and can be exposed to short-term temperatures in the range of -26 to 204 deg C. The leakage and permeability rate of these flanges with FKM is 1×10-9std cc/sec of Helium.
The most common material for these flanges is 304/304L stainless steel, but other materials such as 316L, 316LN, and 6061 aluminum are available as well.

May 13, 2019
April 22, 2019
January 15, 2019
August 03, 2018
The United States International Trade Commission made a final review of the sunset on the 24th, and decided to continue to impose anti-dumping duties on China's and other markets to the United States...
Stainless steel sanitary pump installation and precautions: First feed mouth tube connection, do not leak, put the discharge pool, the following sealing after the liquid material poured out from the...
Centrifugal Centrifugal Pump Installation: Centrifugal pumps should be based on the choice of liquid to be transported, and check the required performance, analysis of suction, discharge conditions,...
Sanitary valves refer to the valves and fittings used in the pharmaceutical, food and other industries where there is a high level of hygiene requirements. The general procurement is the...
Email to this supplier
May 13, 2019
April 22, 2019
January 15, 2019
August 03, 2018
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.